Follow

My HE280 is not reaching the set temperature

If your HE280 is having issues reaching the target temperature, you should run a PID Auto-tune on the hot end. To do this:

 

Send the following command via the terminal: M303 P0 S280 X0

 

Image 1/1: Send the following command via the terminal: M303 P0 S280 X0

 

Fuexplanationion:

  • M303 is the instruction to start the Autotune Process
  • P0 instructs it to perform the test for the hotend
  • S280 sets the temperature to run the test to
  • X0 is the instruction to save the results to EEPROM
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk