Yes you can install the HE280 Hotend on existing SeeMeCNC 3D printers. Here is what you would need:
HE280 Hotend (assembled or kit)
Whip
Instruction Guides:
Machine Upgrades
NOTE: For this upgrade you really need to have the injection molded carriages and Ball Cup Arms installed. If you do not already have them:
Ball Cup Delta Arm Kit (Orion / Rostock Max)
Injection Molded Carriage Set
- If you have an old ATX PSU, you *might* need a new PSU. Older power supply units can have trouble putting out enough voltage to keep up with the HE280!
Comments